| COMBO CLAMP |
| Total length 11 1/2", Holding length 8 3/4", Width 2" |
* A combination frame horn clamp, pull plate, pinch weld
clamp, sandwich clamp, 2" pull clamp plus many more
uses
* Needle point teeth on three sides for a positive grip
* Two inch width to reach into isolator tubes for pulling
* Hex sockets to keep the bolt heads from turning
* Grade 8 bolts and nuts for impact use
* Top clevis plate can be reversed, which gives a straight
pull from the teeth
* Can be offset to fit additional frame horns
